Translate site to Spanish Translate site to Portugese Translate site to German Translate site to French Translate site to Chinese Translate site to Japanese Translate site to Italian Translate site to Afrikaans

Composite Reinforcement System

By Industry: Refining & Petrochem | Oil & Gas Distribution | Oil & Gas Transmission | Civil | Municipal | Industrial | Marine | Offshore | Mining
By Type: Leak Repair | Leak Repair Kits | Pipeline Integrity | Corrosion Protection | Corrosion Repair | Coating Repair | Mechanical Protection

Thermo Fill

DOWNLOAD PRODUCT SPECS »

REQUEST A FREE SAMPLE NOW »

Thermo Fill - high temperature two-part titanium reinforced epoxy putty
Thermo Fill - high temperature two-part titanium reinforced epoxy putty

Thermo Fill high temperature two-part titanium reinforced epoxy putty

Product Information Testing Data & Results Preparation & Application

PRODUCT INFORMATION
Thermo-Fill™ is a two - part, titanium - reinforced epoxy putty. It is designed to bond and repair materials that will be exposed to high temperatures for use in a variety of industrial maintenance applications. Thermo-Fill contains no solvents, is non-toxic and easily prepares for application. Unlike liquid epoxies, Thermo-Fill will not drip or sag and cure on wet surfaces. When fully cured, the material produces a durable, resilient bond resistant to hydrocarbons, ketones, alcohols, esters, halocarbons, aqueous salt solutions and dilute acids and bases.

Typical Applications
  • Fills corrosion voids
  • Designed for high temperature applications
Benefits
  • High temperature resistance
  • No shrinking or pulling away
  • No drips or mess
  • No tools required
Physical Properties
  • Working Life: 1.5 to 2 hours at 75°F (24°C)
  • Service temperature:
    • Continuous: -40 to 450°F (-40 to 232°C)
    • Intermittent: -40 to 500°F (-40 to 260°C)
  • Density: 16.5lb/gal (1.90g/cm3)
  • Solids Content: 100%
  • Shelf Life: 12 months with recommended storage conditions
©Neptune Research Inc. (NRI) NRI® is a registered trademark, while Thermo-Fill™ is a trademarks of NRI. NRI utilizes a process of continuous product improvement for all of our products. While we do strictly adhere to our products’ specifications, we routinely implement product improvements. Therefore, please contact your local NRI distributor or office for the most current product specifications. NRI warrants the quality of this product when used according to directions. User shall determine suitability of product for use and assumes all risk. The seller will not accept liability for more than product replacement.. THMFILL DS 0112

TESTING DATA & RESULTS

Mechanical Properties
Test Method Result
Compressive Strength ASTM D695 8,000 psi (551.5 bar)
Hardness, Shore D @ 75°F (24°C) ASTM D2240 80
Lap Shear ASTM D1002 750 psi (17.2 bar) @ 150º F (66º C)
Dielectric Strength ASTM D149 300 volts/mil
Electrical Resistance ASTM D257 30,000 mega-ohms

* Typical properties for information only; not for specification purposes.


For NRI's full range of testing on the Thermo-Fill™, please email sales@neptuneresearch.com.

PREPARATION & APPLICATION

Coming Soon...