STOPAQ CZH Paste
a mouldable product for corrosion protection of below and aboveground (insulation) flanges and accessories that work under high temperatures.
PRODUCT INFORMATION
STOPAQ CZH Paste is a mouldable product for corrosion protection of below and aboveground (insulation) flanges and accessories that work under high temperatures. STOPAQ CZH Paste in combination with STOPAQ Wrappingband CZH is a perfect product to prevent corrosion.
Typical Applications
- Aboveground insulation flanges that must be protected against corrosion and oxygen ingress into the insulation area long term
- Accessories that work under high temperatures
- Thermit welds
- Coating repairs
- Flange protection
- For external corrosion protection and moulding of buried, immersed and above ground situated flange connections, Insulation flanges and flange seals.
- Valves
- For external corrosion protection and moulding around valves, integrated in pipeline systems. Shaped parts: For external corrosion protection of manhole overs, bolts & nuts.
- Cat-welds
- For protection of welded CP-wire connections on pipelines and other cathodic protected steel constructions
- Coating repairs
- For filling of corrosion pits and voids, prior to application of general STOPAQ® surface coating.
Benefits
- Quick and easy application by hand
- Perfect adhesion on steel and many other base surfaces without applying primer
- Self-repairing ability when slightly damaged due to plastic elastic properties of the material.
- Impermeable to water and oxygen and therefore impossible for growth of bacteria
- Very easy to mould
- Non harmful to people and the environment
TESTING DATA & RESULTS
Product Properties
- Colour
- Green
- Density
- 1,4 - 1,6g/cm3 (NEN 1833)
- Elongation
- > 100% (ASTM D 1000)
- Moisture Absorption
- < 0,03% (ASTM D 570)
- Permeability
- 0,2g/m2/day (ASTM E 96)
- Temperature Ranges
- Temp.
- Operation temp.
- -45°C up to +70°C
- Short term max.
- Up to +85°C
- Application temp. subtrate
- -30°C to +70°C
- Application temp. STOPAQ
- +5°C to +70°C
- Specific Electrical Resistance
- Rs > 10E+8 Ohm x m2 (EN 12068)
- Adhesion
- Tested at 23°C and 70°C (EN 12068)
- Salt spray resistance
- Tested for 720h 5% NaCl 85°C
PREPARATION & APPLICATION
