STOPAQ FN 4100
a special water and oxygen tight corrosion preventive putty.
PRODUCT INFORMATION
STOPAQ FN4100 is a special water and oxygen tight corrosion preventive putty which is excellent for use on objects that are difficult to access e.g. manhole covers, flanges and valves.
When developing STOPAQ FN 4100 the application circumstances were taken into account. Thus this product meets the requirement that the treated object remains easily accessible. STOPAQ FN 4100 is easy to apply, safe and environment-friendly and does not require a primer.
For underground application in combination with Syntho-Glass or Syntho-XT;
- Flange protection
- For shaping and corrosion protection of buried flange connections, Insulation flanges and flange seals.
- Valves
- For external corrosion protection and shaping around buried valves.
- Shaped parts
- For shaping and external corrosion protection of buried man covers, bolts & nut connections.
- Cat-welds
- Welded wire connections on buried pipelines and other buried, cathodic protected steel constructions.
- Quick and easy application by hand
- Can by supplied in cartridges and special 2 kilo sausages
- Perfect adhesion on steel and many other surfaces without applying primer
- No osmosis possible
- Easy to remove and to re-use after removal
- Harmless to environment and people
TESTING DATA & RESULTS
Product Properties
- Colour
- Green
- Density
- 1,2 - 1,5g/cm3 (NEN 1833)
- Moisture Absorption
- < 0,07% (ASTM D 570)
- Temperature Ranges
- Temp.
- Operation temp.
- -10°C up to +30°C
- Application temp. STOPAQ
- +15°C to +30°C
- Specific Electrical Resistance
- Rs > 10E+8 Ohm x m2 (EN 12068)
- Resolved Shear Stress
- > 400 Pa (EN 12068)
- Effect CP
- No influence (ASTM G8)
- Resistance against thermal ageing
- No changes in properties (ASTM D 570)
- Salt spray resistance
- Tested for 1000H, 5% NaCl at 35°C (ASTM B 117). No corrosion detected.
PREPARATION & APPLICATION
