Syntho-Steel™ Epoxy Putty
* This product is recommended for use as part of a NRI composite system. Please contact NRI distributor or manufacturer for complete details.
PRODUCT INFORMATION
Syntho-Steel™ is a two-part, steel reinforced epoxy putty. It cures in minutes and can repair most anything made of metal, masonry, wood, ceramic, glass and plastics. Syntho-Steel contains no solvents, is non-toxic and easily prepares for application. Unlike liquid epoxies, Syntho-Steel will not drip or sag and will set on wet surfaces. NSF 61 and BS6920 approved for use with potable water.
Typical Applications
- Repair leaking water pipes
- Seals leaks in oil and water tanks
- Plug holes and seal seams in air ducts
- Fill corrosion voids
- Designed for low pressure leaks
Physical Properties
- Service Temperature: Continuous: 250°F (121°C)
- Intermittent: 300°F (149°C)
- Density: 2.2 lb/gal, 18.5gm/cm3
- Electrical Resistance: 30,000mega-ohms
- Solids Content: 100%
- Shelf Life: 24 months
- Chemical Resistance: Resistant to hydrocarbons, ketones, alcohols, esters, halocarbons, aqueous salt solutions and dilute acids and bases.
©Neptune Research Inc. (NRI) NRI© is a registered trademark, while Syntho-Steel™ is a trademark of NRI. NRI utilizes a process of continuous product improvement for all of our products. While we do strictly adhere to our products’ specifications, we routinely implement product improvements. Therefore, please contact your local NRI distributor or office for the most current product specifications. NRI warrants the quality of this product when used according to directions. User shall determine suitability of product for use and assumes all risk. The seller will not accept liability for more than product replacement. SSteel DS 0711
TESTING DATA & RESULTS
| Test | Method | Result |
|---|---|---|
| Hardness, Shore D | ASTM D2240 | 80 |
| Lap Shear | ASTM D3163 | 900 |
| Compressive Strength | ASTM D695 | 12,000 psi (827.3 bar) |
| Dielectric Strength | ASTM D149 | 300 volts/mil |
| * Typical properties for information only; not for specification purposes | ||
For NRI's full range of testing on the Syntho-Steel™ Epoxy Putty, please email sales@neptuneresearch.com.
PREPARATION & APPLICATION
No information available at this time.
