Trident-Seal® Live Natural Gas Repair Kit
Trident-Seal®, live natural gas repair system permanently seals active leaks, up to 60 psi (4 bar) without interruption to service. This kit is pre-packaged to contain enough material to repair a pinhole or threaded fitting on diameters up to 6 inches; larger repairs can be made by utilizing more than one kit.
Third party testing for long term pressure retention has been conducted at 90 psi (6 bar). The Trident family of products was specifically designed for the natural gas industry and requires Operator Qualified training.
- Live natural gas leaks on:
- Threaded fittings
- Meter set
- Used above or below ground
- Instant, permanent repair
- No shutdown or relights
- Simple application
- Step-by-Step Instructions
- Sanding Cloth
- Solvent Cleaning Wipe
- Protective Gloves
- Trident-Seal Putty
- Trident-Seal Pressure Sealing Tape
- Trident-Glass™ Outer Wrap
- Compression Film
- VOCs: None
- Service Temperature: -50 to 250°F (-45 to 121°C)
- Application Temperature: 50 to 150°F (10 to 65°C)
- Shelf Life: 24 Months with recommended storage methods
|Item #||Pipe Diameter||Roll Size|
|TS2580||1/2” – 1” (12.7mm – 25.4mm)||2” x 7.2′ (5.08cm x 2.195m)|
|TS3104||1 1/4” – 2” (31.75mm – 50.8mm)||3” x 14′ (7.62cm x 4.27m)|
|TS4173||2 1/2” – 4” (63.5mm – 101.6mm)||4” x 25′ (10.16cm x 7.62m)|
|TS4335||4 1/2” – 6” (114.3mm – 152.4mm)||4” x 40′ (10.16cm x 12.19m)|
|Tensile Strength (glass)||ASTM D3039||41,000 psi (2826.85 bar)|
|Lap Shear (putty)||ASTM D3163||900 psi (62.05 bar)|
|Pressure rating once cured||Field Test||90 psi (6.2 bar)|
For NRI's full range of testing on the Trident-Seal®, please email email@example.com.
Threaded Repair: Mold mixed Trident-Seal® Putty into a 1/8″-1/4″ (3mm-6mm) rope and place around entire circumference of the joint, pressing firmly into place. NOTE: the rope should not exceed the shoulder of female fitting.
Refer to NRI’s detailed installation guide for additional system information.